Skip to content

Modular furniture for books, vinyl and everyday living

Trusted by customers worldwide since 2016

Customize dimensions, layouts and finishes to fit your space

Search

Mid-Century Entryway & Shoe Benches: A Buyer's Guide

Mid-century entryway and shoe benches in birch plywood
entryway bench japandi mid century modern plywood furniture shoe bench shoe rack

The entryway is the hardest-working square metre in the house, and the bench is what tames it. Somewhere to sit while you pull your shoes on, somewhere to keep the pile of trainers off the floor, and a clean horizontal line that turns a cramped hallway into a proper room. A good mid-century entryway bench does all three at once – and in birch plywood it does them without crowding a tight space.

This guide covers how to choose one: what makes a bench mid-century (and Japandi), the difference between a shoe bench and a shoe rack, how to pick the storage and the legs, and how to size it to your hallway.

What makes an entryway bench mid-century – and Japandi?

A mid-century bench reads that way for a few reasons: it sits low and long, rests on slim legs that lift it off the floor, and lets warm, honest wood carry the look instead of paint or bulk. The openwork frame and the layered birch edge are the decoration – nothing heavier than it needs to be.

Japandi takes that restraint somewhere calmer – soft lines, natural material, an uncluttered silhouette. Our Nokori shoe bench is built in exactly that spirit: a quiet, pared-back form in birch ply that suits a serene entryway. If you’ve been searching for a Japandi shoe bench, that’s the one to look at.

Japandi shoe bench in birch plywood with an open lower shelf
The Nokori shoe bench – a Japandi form with an open lower shelf.

Shoe bench or shoe rack?

The two names get used interchangeably, but there’s a real difference:

  • A shoe bench is first a seat – somewhere to sit while you put shoes on – with storage underneath (open bars or a shelf).
  • A shoe rack is first storage – more room for shoes, usually taller, and a surface on top rather than a primary seat.

Most people want the bench: sit down, put your shoes on, keep the rest tucked below. If storage is the priority – a busy family hallway, a lot of pairs – our taller Midlite shoe rack gives you more room underneath while keeping the same clean, mid-century line.

Choosing the storage below

Every bench in the range lets you choose what happens under the seat, and it changes both the look and the use:

  • Bottom bars – open slats that keep the piece light and airy. Best for shoes, and the most visually minimal option.
  • Bottom shelf – a solid lower shelf that contains baskets, boxes and clutter as well as shoes. The tidier, more practical choice.
  • An upholstered cushion on top – added comfort for a bench you’ll sit on daily, in the fabric of your choice. Browse the upholstery colours to see the range.
Birch plywood entryway bench with an upholstered cushion and a bottom shelf
Add an upholstered cushion for a bench you’ll sit on daily.

Getting the size right for your hallway

Entryways are often the tightest space in the home, so the bench has to earn its footprint. It comes down to depth and width – and how much floor you can spare:

Space What to choose
Narrow hallway The slim 30 cm-deep bench – seven centimetres shallower than standard, so it fits where nothing else will.
Minimal, linear look The 32 cm straight-leg bench at 74, 85 or 97 cm wide – a shallower, straighter profile for a stricter modern interior.
Standard entryway The 37 cm-deep bench at 74, 85 or 97 cm wide – the everyday sweet spot.
Long wall / two people The long entryway bench at 120 or 150 cm – room for two to sit and reinforced so it never sags.

Height sits around 64 cm (a comfortable seat) whichever depth you choose, and because every bench is made to order, the width can be built to the exact gap your hallway allows.

Flared legs or straight?

A small choice that sets the tone. The signature flared legs give the classic mid-century stance – angled, light, a little playful. Straight legs read more minimal and linear, and suit a stricter, contemporary interior – and the straight-leg version sits at a slightly shallower 32 cm, a touch trimmer than the standard depth. Both use the same birch and the same build; it’s purely a question of the line you prefer. See the straight-leg version if minimal is your look.

Detail of a mid-century shoe bench with a flared leg and a layered birch-plywood edge
The signature flared leg and the layered birch edge, with a bottom shelf for baskets.

Why plywood makes a good bench

A bench takes real weight, right at the point where furniture is often flimsiest. Birch plywood suits it because the cross-laminated structure is strong for its weight – a slim, light bench that still holds two adults – and stays flat rather than sagging over the years. The layered birch edge turns the honest construction into a detail worth seeing, and every piece is hand-finished with a non-toxic, matte hard-wax oil. (More on the material in our guide to what furniture is made of plywood.)

Styling the entryway

A few small moves make the whole corner feel calm rather than cluttered:

  • Keep the top clear for the things you grab on the way out – keys, a plant, a small tray – and let the storage below do the hiding.
  • Use baskets on the bottom shelf to corral odd items; open bars suit shoes lined up in a row.
  • Echo the wood elsewhere – a nightstand or shelf in the same finish ties the home together.
  • In a narrow hall, a slim, leggy bench that shows floor underneath keeps the space feeling open.

Our entryway bench range

Each is made to order from Finnish birch plywood, hand-oiled in the finish of your choice, and adjustable in size:

See them all together in the bench collection.

FAQ

What’s the difference between a shoe bench and a shoe rack?

A shoe bench is primarily a seat with storage underneath – you sit on it to put shoes on. A shoe rack is primarily storage, usually taller, with more room for pairs and a surface on top rather than a main seat. Our Midlite is a taller shoe rack; the rest of the range are benches.

What size entryway bench should I choose?

Match the width to your wall (74, 85 or 97 cm for a standard hallway; 120 or 150 cm for a long wall or two people) and the depth to your space (30 cm slim for narrow halls, 32 cm on the straight-leg version, or 37 cm standard). Height is around 64 cm. Since ours are made to order, we can build to your exact width.

What is a Japandi bench?

Japandi blends Scandinavian warmth with Japanese simplicity – soft, pared-back forms in natural material. Our Nokori shoe bench in birch ply is made in that spirit: minimal and calm, ideal for a serene entryway.

Bottom bars or a bottom shelf – which should I pick?

Bars feel lighter and are great for shoes lined up in a row. A shelf contains baskets, boxes and clutter as well as shoes, so it’s the tidier, more practical choice for a busy entryway.

Is plywood strong enough for a bench?

Yes – cross-laminated birch plywood is strong for its weight, so a slim bench comfortably holds two adults and stays flat rather than sagging. On the wide benches we add a reinforcing bar under the seat for the longer span.

Can I order a custom size or add a cushion?

Yes. Every bench is made to order, so the width and depth can be tailored to your hallway, and a made-to-measure cushion can be added in the fabric of your choice – browse the upholstery colours here. Note your choice when ordering, or message us first to confirm.

The short answer

Pick the depth for your hallway, the storage for what you keep by the door, and the legs for your style – then let the material do the rest. A birch-plywood entryway bench is a small piece that quietly fixes the busiest corner of the home, built to last and made to your space.

Browse the bench collection to start, or message Kasia if you’d like a custom size or a cushion.